Features / Technology

Meeting Deepwater Drilling Challenges with Invert Emulsion Fluids

Baroid’s latest clay-freeINNOVERT™ synthetic-base fluid (SBF), based on clay-free ACCOLADE® technology, has delivered exceptional performance on the first nine wells of a new contract with a major operator in ultra-deep water over 5,000 feet offshore West Africa. Based on a low viscosity n-alkane base fluid and built without using the regular organophilic colloidal additives used in conventional invert emulsion fluids, this state-of-the-art drilling fluid represents a quantum leap in deepwater drilling fluid performance.

Halliburton: Hydrating Lost-Circulation Squeeze Helps Restore Circulation in Severe Loss Zone

While drilling a deep gas well through sensitive shales in the Qawassim formation in the Nile Delta area of Egypt, a major operator encountered severe lost circulation in the 8-1/2-in. intermediate interval, beginning immediately below the 9-5/8-in. casing shoe at approximately 3,100 m. Porous sand stringers are interspersed in the shale sequence, and these stringers were the suspected thief zones.

The Value of Beam pumping System Automation

The need to enhance well-performance is driving the growth of well automation and optimization systems. In today's efficiency demanding business world, producers require systems that are capable of more than simply increasing the rate of production. Producers also desire the ability to decrease system failure rates consequently minimizing well down time and lifting cost by extending equipment running life, thus maximizing total system efficiency.

Radar imagery offers a slick solution for locating rich reserves at sea

A thousand feet down, the ocean floor shakes. Bubbles of oil and gas burp out. In a wafting plume, the oil heads for the ocean surface where it forms a film less than a millimeter thick and many cover hundreds of square kilometers.

Beam Pumping System for Deep & High Volume Wells

Worldwide there are over 949,550 producing oil wells, about 93% of these wells are operated using different artificial lift methods and roughly over 72% are producing using beam pumping system.

Page 13 of 13

Login

Welcome! Login in to your account

Remember me Lost your password?

Lost Password